Print
Bookmark
Products by Type
- Industrial Gases
- Liquefied Industrial Gases
- Refrigerant Gases
- Drinks Dispense Gases
- Packaged Chemicals
- Healthcare Gases
- Dry Ice
- Food Preservation Gases
- Industrial Products
- Balloon Gas & Equipment
- Safety Products (PPE)
- Healthcare Equipment
- Cryogenic Equipment & Storage Vessels
- Speciality Gases & Equipment
Low Delivery Pressure Regulators
The L700 series offers a range of single-stage regulator models for very low delivery pressures.
Features
- large diaphragm gives excellent control
- very low delivery pressures
- pressure-adjusting screw protected by security cap
- outlet needle valve for flow control
- compression fitting or hose end connections
- for non-corrosive and non-hazardous gases
Specification
- body: cast zinc
- seat: rubber
- seals: rubber
- diaphragm: rubber
- operating temperature: -40°C to +65°C
- weight: 3.5kg (approx.)
- maximum inlet pressure: 17.2 bar (250 psig)
- flow rate data: Cv = 0.06
| Outlet pressure | Outlet gauge | Relief valve | Model |
|---|---|---|---|
| 5-62 mbar (0.9psi) | 0-35" w.g (1-3psi) | 16-39" above set pressure | L700 |
| 40-340 mbar (0.5-5.0 psi) | 0-10-30 psig* | 7-9 psi | L701 |
| 340-680 mbar (5-10 psi) | 0-10-30 psig* | L702 |
Compressed resolution between 10-30 psig
Please note: The L701 and L702 do not shut-off when the adjusting screw is completely turned out.
Important: If inlet pressure exceeds 17 bar, an additional regulator is required in-line prior to this model. A connecting hose kit is available.
Additional options
There are no recommended additional options.
How to order
ALWAYS specify gas or mixture to be used:
- select model e.g. L700, L701
- select inlet connection e.g. 1/4" compression, 1/4" hose end
-
select outlet connection e.g. 1/4" compression, 1/4" hose end
