L130 series Features
- electrical heating avoids icing up at high flows
- chromed bar stock brass body
- stainless steel diaphragm
- relief valve fitted as standard
- seat mechanism with integral 10 micron filter
Specification
- body: chromium-plated bar stock brass
- seat and seals: PTFE
- diaphragm: 316L stainless steel
- weight: 2.5kg (approx.)
- dimensions: W 195.8mm x H 138.4mm x D 145.2mm
- maximum inlet pressure: 207 bar
- flow rate data: Cv = 0.1. (Max. flow rate for N2O and CO2 is 30 lpm)
- heaters 3x50w, 240V AC with thermostatic control and thermal cut-out
- temperature range: 35°C to 49°C
Select the model you require:
Outlet pressure bar (psi) |
Outlet gauge bar (psi) |
Relief valve setting bar (psi) |
Model required |
---|---|---|---|
0-2.0 (0-30) | 0-4 (0-60) | 22 (325) | L130 |
0-3.4 (0-50) | 0-7 (0-100) | 22 (325) | L131 |
0-6.9 (0-100) | 0-14 (0-200) | 22 (325) | L132 |
Additional options
Option | Use | Models available |
---|---|---|
Needle valve | To control gas flow from single or two stage regulators | NV1, NV2 |
Diaphragm valve | To control gas flow. No variation in closing position over life of valve. | DV200B |
How to order
ALWAYS specify gas or mixture to be used:
- select model e.g. L130, L131, L132
- select inlet connection e.g. BS13, BS8
- select outlet connection e.g. hose end standard, (1/4" compression and other fittings available)
- select any options e.g. needle valve
For further information call 1800 355 255 or email